-
Description
iProGadgets Repair Tools ET32C Car Signal Generator Multimeter Coil Solenoid Relay Control Vehicle Maintenance Wave Signal Source Output Waveform Storage
Features:
Specifications:
Signal generator parameters:
Multimeter parameters:
Package includes:
Features:
- Adjustable signal parameters: The output frequency of the signal generator is adjustable from 1HZ to 9999HZ; the output amplitude is adjustable from -12V to +12V
- Multiple signal output: It can output square wave, sine wave, combination wave (square wave N+N, sine wave N+N), scanning wave, and DC wave.
- Automotive signal simulator: Can simulate Hall-type and magnetoelectric crankshaft and cam signals. Supports crankshaft and cam signal simulation for gasoline and diesel vehicles
- Support magnetoelectric signal scanning or Hall signal scanning
- Signal storage: The instrument supports 50 groups of signal waveform storage, and can store waveforms in specified locations
- Combined wave signal: The missing tooth signal can be set arbitrarily (for example, combined wave 58+2, 10+1) without connecting to a computer
- Scanning wave signal: It can output scanning wave to simulate the process of crankshaft cam signal running from low speed to high speed
- Analog voltage output :-12V to +12V adjustable, step value 1V
- Coil control: Supports ignition coil control, solenoid valve control, and relay control (only supports coil control of 30V/1A and below)
- Multimeter: Measure DC voltage, AC voltage, resistance, diode, continuity, capacitance, frequency, and duty cycle. Quantity function
- The internal power supply of the equipment is isolated to prevent electric shock
Specifications:
- Display screen: 2.8 inch 320 * 480 resolution
- Touch screen: Not supported
- USB interface: Type-C USB
- Battery: Built-in 4.2V lithium battery
- Storage temperature: -20~60 ℃ (-4~140 ℉)
- Working temperature: 0-50 ℃ (32-122 ℉)
- Working humidity: <85% RH (non-condensing)
- Product size: 134*69*25mm
- Product weight: 125g (excluding accessories)
Signal generator parameters:
- Sine wave/square wave frequency range: 1Hz~9999Hz
- Sine wave/square wave frequency step: 1Hz
- Sine wave/square wave peak range: -12V~+12V
- Sine wave/square wave peak step: 1V
- Scanning wave scanning time range: 1s~999s
- Maximum number of combined wave combinations: 99+99
- Output voltage range: -12V to +12V
- Output voltage step: 1V
- Coil control power: Below 30V/1A
- Waveform storage: 50 sets
- Duty Setting: 1%~99%(only for square wave )
Multimeter parameters:
- Maximum DC input voltage: 1000V
- Maximum AC input voltage: 750V
- Maximum measured resistance: 40MΩ
- Maximum measured capacitance value of capacitance: 100uF
- Maximum frequency measurement: 50KHz
- Duty cycle measurement range: 0.1%~99.9%
- Diode measurement range: 0V~1.5V
- Maximum resistance value for on/off detection: 30Ω
- Display: 4000 counts
- Updated: 3 times per second
Package includes:
- 1 x Signal Generator Multimeter
- 1 x Test Leads
- 1 x Crocodile Clamp Wires
- 1 x USB Cable
