-
Description
iProGadgets Repair Tools Tooltop ET2010A Digital Oscilloscope Multimeter 1Mhz 2.5MSps Color Handheld Oscilloscope AUTO Waveform Electronic DIY Tools
Features：
Features：
- 2.5Msps high-speed sampling, 1MHz analog bandwidth, 4000 count digital multimeter.
- One-click visual wave, there are three waveform scanning modes: Automatic/Conventional/Single
- Save function for data and waveform in the measurement; A total of 100 sets of data and 10 waveforms can be saved
- When measuring waveforms, you can set parameters independently, such as time base, amplitude, waveform scanning mode, etc
- REL, effectively eliminates the lead resistance, distributed capacitance, and interference signal
- Multimeter functions include DC/AC voltage/current, resistance, capacitance, frequency, duty cycle, diode continuity test
- Automatic/manual switching for measuring range and display of measurement data and historical data on the same screen
- Overload protection 10A double protective tube, dual protection of the instrument
- Automatic shutdown in case of no operations for 15 minutes: bright backlight and clear display
- Adopt a 2.4-inch color screen display, the display effect is clear
- Higher reliability: No adjustment of the potentiometer is required for panel calibration and internal storage calibration
- Display: 240x320 Color screen
- Backlight: Constantly on
- Battery: AA batteries *3 (Not included)
- Working current: About 65mA
- usage time: More than 10 hours
- Use: 0°C~40°C; <75%RH
- Dimensions: 77*157*25.5mm
- Observation area: 49.0*36.7 mm
- Input resistance: About 10MΩ
- Auto shutdown: 15 minutes or disabled
- Sleep current: About 35uA
- Storage capacity: 100*data, 10*waveform
- Storage: -10°C~60°C; <90%RH
- Weight: About 135g
- Analog bandwidth: 1MHZ
- Channel: 1
- Scan mode: Auto/normal/single
- Vertical sensitivity range: 300mV~100V per grid
- Vertical amplitude accuracy: ±(5%+0.2div)
- Auto-configuration: Auto set time base and vertical amplitude
- Max real-time sampling rate: 2.5Msps
- Input resistance: About 10MΩ
- Time base range: 2.5us~10s per grid
- Time base accuracy: ±(0.01%+0.1div)
- Trigger edge selection: Rising/falling edge
- Automatic measurement function: Vp-p, Vavg, Vrms, HZ
- DC Voltage: 400mV~600V
- DC Current: 4A~10A
- Resistance: 400.0Ω~40.00MΩ
- Frequency: 5Hz~5MHz
- Diode test: Voltage is about 1.5V
- AC Voltage: 400mV~600V
- AC Current: 4A~10A
- Capacitance: 51.2nF~100uF
- Duty cycle: 0%~100%
- Continuity test: Resistance <50Ω, beep
- 1 x Oscilloscope Multimeter(Random Color)
- 1 x Test Leads
