-
Description
iProGadgets Repair Tools UNI-T UTL8511/UTL8512/UTL8512B+/UTL8513 High-precision Programmable DC Electronic Load Instrument Battery Capacity
Features:
Features:
- Measuring range 150W/300W/600W, 150V/500V,15A/30A/120A
- CC/CV/CR/CP four basic modes
- 0.1mV/0.1mA high resolution
- Voltage and current sampling rate of 40kHz, dynamic frequency up to 10k dynamic current/voltage test
- Constant resistance + constant current, constant voltage + constant resistance, constant voltage + constant current three combinations of test
- CR-LED test, power rise/fall time test.
- OCP/OPP/OVP test, load effect test
- Ripple sampling and detection function
- Independent short circuit test function (only valid in CC, CV, CR, CP mode)
- Over-voltage, under-voltage, over-current, over-power, overheat and anti-reverse connection protection
- List mode self-storage, support external U disk save and call, support U disk upgrade system
- List of self-starting voltage functions, over-voltage short-circuit voltage limiting function
- Screenshot and list save and recall function.
- Remote voltage compensation input function, current remote monitoring function, external trigger function
- Intelligent temperature control fan, power failure memory function
- Standard RS-232C interface, support for SCPI protocols
- Matching upper computer software to realize remote control and monitoring.
- Applicable to standard half 2U cabinet
- Model: UTL8512B+
- Input voltage: 0~500V
- Input Current: 0~1.5A/0~15A
- Input power: 300W
- Minimum Operating Voltage: 3V at 15A
- Range: 0~50V/0~500V
- Resolution: 0.1mV/1mV
- Accuracy: ±(0.05%+0.025%FS)
- Range: 0-1.5A/0-15A
- Resolution: 0.1mA/1mA
- Accuracy: ±(0.05%+0.05%FS)
- Range: 0.1Ω-25kΩ
- Resolution: 16bit
- Accuracy: 0.1%+0.08FS
- Range: 300W
- Resolution: 10mW
- Accuracy: ±(0.1%+0.1%FS)
- T1 & T2: 50μs~99.999s/Res:1μs
- Accuracy: 5μs ±100ppm
- Rise/Fall Slope: 0.001~1.5A/μs
- Minimum rise time: ≥10μs
- Range: 0-50V/0-500V
- Resolution: 0.1mV/1mV
- Accuracy: ±(0.025%+0.025%F5)
- Range: 0-3A/0-15A
- 0.01mA/0.1mA
- Accuracy: 0.05%+0.05%FS
- Range: 300W
- Resolution: 10mW
- Accuracy: ±(0.1%+0.1%FS)
- Over-power protection: ≥1.05 times the set value delayed protection; ≥1.1 times the set value immediate protection; > (FS + 15WM) immediate protection
- Over-current protection: ≥1.05 times the set value delay protection; ≥1.1 times the set value immediate protection; > (FS + 1.5A) immediate protection
- Over-voltage protection: ≥1.05 times the set value delay protection; ≥1.1 times the set value immediate protection; > (FS + 3V) immediate protection
- Over-temperature protection: ≥85℃
- Input terminal impedance: 1MΩ
- Fuse specification: 0.5A(110V)/0.25A(220V)
- Power requirements: 110V/220V 50/60Hz
- Measurement resolution: 0.1mV/0.1mA
- Basic operation mode: CC/CV/CR/CP
- Test Function: Dynamic Test, Overload Test, Automatic Test, List Test, Battery Test, CR-LED
- Protection functions: over-voltage, low-voltage, over-current, over-power, overheat, anti-reverse connection and other protections
- Power-on warm-up: at least 15 minutes
- System settings: Chinese and English switching, key tone setting.
- Data storage: U disk storage
- Communication interface and protocol: RS-232C interface and SCPI protocol
- Upper computer software: Yes
- Operating temperature: 0℃~40 ℃
- Storage temperature: -10℃~60 ℃
- Operating humidity: 20%~80% (non-condensing)
- Storage humidity: 20%~80% (non-condensing)
- Operating altitude: ≤2000 meters
- 1 x Electronic Load Meter
- 1 x Power Cable
